Notifications
Clear all

What could be making this noise during printing?  

  RSS
Nimitz
(@nimitz)
Trusted Member
What could be making this noise during printing?

I've had this i3 Mk3S printer about 2 months and have done 25+ prints with no issues.  I just started a print and now the printer is making this knocking sound.  the sound is faster when its doing a circle vice a straight line of filament

trim.ECB051F3-7E09-49D4-9D7B-8EEA7EC47AA9

Publié : 22/04/2020 7:47 pm
Nimitz
(@nimitz)
Trusted Member
Topic starter answered:
RE: What could be making this noise during printing?

problem solved.  apparently the filament broke off right at the pulley gear which loads it into the extruder and off course no filament was coming out as well. cleared the broken piece of filament from the extruder but i hope this roll of clear filament is not brittle and that's why it broke ..... I need to just complete this one last 2 hr print with this stuff ....

Publié : 22/04/2020 9:10 pm
Partager :