Avisos
Vaciar todo

[Resuelto] Sub Bed Mounting Dimensions  

  RSS
CAKCAD
(@cakcad)
Active Member
Sub Bed Mounting Dimensions

Hello,

Could anyone point me to where Prusa gives the CAD models for the sub bed (the frame underneath he heating plate) or a schematic so I could see the spacing between holes?

Thanks

Best Answer by Neophyl:

The heatbed has the hole spacing too remember as it has to match the lower frame.  That is here https://github.com/prusa3d/Heatbed_MK52_magnetic

The MK3  is here https://github.com/prusa3d/Original-Prusa-i3?tab=readme-ov-file   

Respondido : 09/08/2024 5:51 pm
Neophyl
(@neophyl)
Illustrious Member
RE: Sub Bed Mounting Dimensions

The heatbed has the hole spacing too remember as it has to match the lower frame.  That is here https://github.com/prusa3d/Heatbed_MK52_magnetic

The MK3  is here https://github.com/prusa3d/Original-Prusa-i3?tab=readme-ov-file   

Respondido : 09/08/2024 7:06 pm
CAKCAD
(@cakcad)
Active Member
Topic starter answered:
RE: Sub Bed Mounting Dimensions

Thanks!

Respondido : 09/08/2024 10:34 pm
Compartir: