Notifiche
Cancella tutti
Pagina 2 / 2
Precedente
Topic starter
answered:
Re: Silencing part cooling with PLA
I measured noise and airflow:
So in reviewing the results, I would say it depends.
Investigating further I got the impression that, in most cases the strongest source of noise is the air flow out of the openings towards the nozzle.
Postato : 18/02/2019 4:23 pm
RE: Silencing part cooling with PLA
Well its a couple of years later... in case anyone is still active do you have some stl/3mf files I can try for myself?
Postato : 16/08/2024 7:21 am
Pagina 2 / 2
Precedente