RPI news (PrusaConnect and PrusaLink)?
Hi guys,
after a few months of using MK3S, I'd like to start using (=play with that) RPI. BUT - I found only this guide https://help.prusa3d.com/en/article/prusaprint-rpi-zero-and-octoprint_2180 with the following info "PRUSAPRINT (PRUSA'S CUSTOM OCTOPRINT IMAGE) IS NOW OUTDATED NO AND LONGER BEING MAINTAINED! If you wish to use Octoprint, we recommend following the guide to creating your own Octoprint image. We will launch PrusaLink and PrusaConnect, Prusa's own solution, in the near future.".
Right now, I don't want to start playing with it when the instructions are probably outdated and there will be something new in the "near future".
So the question - does anyone have any idea when the new era of PrusaLink and PrusaConnect could be introduced?
I found PrusaConnect guide pro MINI ( https://help.prusa3d.com/en/article/prusa-connect-local-mini_133279) and this info about the MK3S - https://connect.prusa3d.com/ with info "For complete instructions on how to install PrusaLink on your printer, see our help." - but the "help" link leads to www.prusa3d.com 🙁