Notifications
Clear all
P.I.N.D.A sensor doesn't recognize a calibration point in print bed
hello
after more than a year of fine printing my MK3S+ needed a Calibration, while calibrating the panda sensor (that does work, I checked it) didn't recognized one of the calibration points of the bed (the model one in the third raw).
I have no idea of what can cause a problem like this, let alone, how to solve it/
PLZ SEND HELP!!!!!!!!!
Posted : 28/07/2023 1:45 pm
Make sure you don't have a sticky point on your smooth rods. Clean and lubricate.
Come back here if that doesn't help.
Cheerio,
Posted : 28/07/2023 7:23 pm