Need trusted 0.5 mm nozzle profile

Letzter Beitrag

RSS

Lucas G.

(@lucas-g)

Active Member

Need trusted 0.5 mm nozzle profile

Would anyone like to share a PrusaSlicer profile that I can use with my brand new nozzle X 0.5mm. I bought this nozzle to be able to print some wood filled filaments with reasonable detail. I searched Internet and even found some pieces of profiles but it isn't looking useful to me. If I will need to create such profile myself then any help would be appreciated. Thank you.

Dieses Thema wurde geändert Vor 6 years von Lucas G.

Veröffentlicht : 15/02/2020 4:22 pm

1 weiteren Personen gefällt das

bobstro

(@bobstro)

Illustrious Member

RE: Need trusted 0.5 mm nozzle profile

I've got 0.5mm profiles in my sample set that you're welcome to try. I've used them with a variety of materials.

My notes and disclaimers on 3D printing

and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan Unfortunately,…

Veröffentlicht : 15/02/2020 6:31 pm

3 weiteren Personen gefällt das

Forums-Statistiken

598 Foren

71.5 K Themen

501.8 K Beiträge

12 Online

82.5 K Mitglieder

Letzter Beitrag: Core One crash/restart Unser neuestes Mitglied: Tim Neueste Beiträge Ungelesene Beiträge Schlagwörter

Forum Icons: Das Forum enthält keine ungelesenen Beiträge Das Forum enthält ungelesene Beiträge

Themen-Icons: Unbeantwortet Beantwortet Aktiv Heiß Oben angepinnt Nicht genehmigt Gelöst Privat Geschlossen