MK3 get real noisey?  

RE: MK3 get real noisey?

Posted by: @colbert556

Hi all! New to Prusa Fanboying not new to 3D printing or Fanboying I'm general (Apple4Life)...

At any rate came from a Flashforge and cherished it! A very long time and still prints marvelous! Quick forward to my MK3 coming... for one thing, I love it. What's a cool machine! Besides, I began seeing the part cooling fan is noisey... I don't know why, but rather it just began.

Am I alone with this issue?

Thirdly, I need to say... in ordinary mode I read a ton about how calm this printer was.... in any case, my assessment is, it's truly not tranquil. Covertness is noteworthy, however when it takes enormous actions it's overly noisy. My Flashforge is possibly not calmer but rather unquestionably a great deal lower pitched. Simply my assessment.

On my fan would it be advisable for me to contact Prusa?

One of my printers was noisy.  I replace the bearinsg and lubricated it and it is much better.  

RE: MK3 get real noisey?

Dirt in the fan?

Fan bearings noise?

The table under the printer makes a lot of time a lot of noise?

Did you maintenance on the printer, cleaning and put oil on printer every few rolls?

Check all screws on printer, do this a few times to get all screws

Some people complained about the front piece where turn on that this makes a sound, search forum on this.

RE: MK3 get real noisey?

@peter-m

There are so many possibilities.  

RE: MK3 get real noisey?

Moose.