M3s rebooting loading gcode
hi.
after having some problem with nozzle and fist layer i changed to a 0,6 nozzle and increased first layer temp by 10C but now i cant load any gcode the printer reboots after some seconds loading.
Im trying to build a IKEA lack with Prusa .STL files, and even tryed to print thing by thing with same result.
Have the latest firmware, tryed 3 different SD cards; reformated it
RE: M3s rebooting loading gcode
And Prusa Slicer 2
RE: M3s rebooting loading gcode
after runing the calibration again it sems to work agan
RE: M3s rebooting loading gcode
My guess would be that the extruder heater wires got shorted to each other when you were replacing the nozzle. They are not insulated right next to the heater and you may have moved them so that they were touching. Eventually, they could have spread a little again, but I'd suggest checking them so that you don't have any nasty surprises in the future.