Impossible to find a DELTA FAN for mk3s+
Im searching all the internet to purchase 2 delta fans (for backup).
Tryed to purchase from prusa like 3 times, but they always ship Noctua Fans.
Noctua is 4500 rpm - Delta is 8000
Noctua is 4-4,5 cfm - Delta is 9 cfm
I only want to purchase this Delta Model.
Anyone knows where to find it?
The mini fan is the same? (it says its not compatible with mk3s+)
Help please
RE: Impossible to find a DELTA FAN for mk3s+
I thought prusa did send delta maybe try AliExpress
Please help me out by downloading a model it's free and easy but really helps me out https://www.printables.com/@Hello_474427/models
RE:
The MK3s+ DELTA FAN
The MINI
RE: Impossible to find a DELTA FAN for mk3s+
No luck in aliexpress.
I uploaded a photo from DELTA MK3s+ and DELTA from mini .....
Its the same fan.... I can not understand why Prusa says they are not compatible.....
RE:
Maybe the mini cable is shorter than the mk3 cable
regards Joan
I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK
RE: Impossible to find a DELTA FAN for mk3s+
It could be the conector
Please help me out by downloading a model it's free and easy but really helps me out https://www.printables.com/@Hello_474427/models
RE: Impossible to find a DELTA FAN for mk3s+
i have found lots on alixpress you just need to solder the old conector onto new fan search delta afb0405vha-a on alixpress
Please help me out by downloading a model it's free and easy but really helps me out https://www.printables.com/@Hello_474427/models
RE: Impossible to find a DELTA FAN for mk3s+
This are the properties of the MK3 print fan: Connector: Molex 5057-9403 Model name: NF-A4x10 Max RPM: 4500 Static pressure: 1,78 mm H₂O Airflow: 8,2 m³/h Input: 5V, 50mA
And this from the MINI+: Rated voltage: 5 VDC Input current: 0.11 (max 0.16) A Speed: 8000 RPM Max air flow (at zero static pressure): 15.72 m³/h Max air pressure (at zero airflow): 6.160 mm H₂O
hope this helps
Please help me out by downloading a model it's free and easy but really helps me out https://www.printables.com/@Hello_474427/models