Notifiche
Cancella tutti
i just want to raise the z after a failed print.
how do i do this?
Postato : 14/06/2020 12:51 am
RE: i just want to raise the z after a failed print.
Press and hold in the front knob.
My notes and disclaimers on 3D printing
and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan
Postato : 14/06/2020 1:22 am
RE: i just want to raise the z after a failed print.
how do i do this?
Hello and welcome in Prusaforum,
after you stopped the print and if you want to raise the z-axis, press and hold the knob on the lcd and it will jump to the z-axis control.
if you mean the live-z adjustment - look here: https://help.prusa3d.com/de/article/adjust-live-z_112431
Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.
Postato : 14/06/2020 1:23 am
Topic starter
answered:
RE: i just want to raise the z after a failed print.
@bobstro
thanks a bunch
Postato : 14/06/2020 1:29 am