RE: Hotend does not receive voltage after printing for some time
If this has happened it can explain lcd going funny and all the unexplained errors did this to raspberry pi once completely fried it all because of static
Please help me out by downloading a model it's free and easy but really helps me out https://www.printables.com/@Hello_474427/models
RE: Hotend does not receive voltage after printing for some time
I touched the einsy because it was broken like this. I also unplugged the display cables before I touched the board so I doubt any static electricity could damage it.
RE: Hotend does not receive voltage after printing for some time
just a thouht can verry esially happen
Please help me out by downloading a model it's free and easy but really helps me out https://www.printables.com/@Hello_474427/models
RE: Hotend does not receive voltage after printing for some time
Ok it looks like after looking at when the print stops it stops immediately after the first layer is complete. I thought it was because I had an old version of cura so i updated it and it still stops after the first layer.