Firmware is not accessible "This web property is not accessible via this address."
Has anyone else had the issue when they try to download firmware for the MK3s that it brings up "www.prusa3d.comThis web property is not accessible via this address." I was about to download the file from github but none of the options look like the one I need. Any help?
RE: Firmware is not accessible "This web property is not accessible via this address."
RE: Firmware is not accessible "This web property is not accessible via this address."
Yes I'm seeing the same problem. It happens with every firmware file I attempt to download.
RE: Firmware is not accessible "This web property is not accessible via this address."
Prusa's servers recently had problems with mass spam and ddos attacks. For this reason they have revised some filters. This caused delays in web access and in the forum.
wbr,
Karl
Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.
RE: Firmware is not accessible "This web property is not accessible via this address."
By now, the problem should be fixed. If it still does not work for you, I would contact the Prusachat.
wbr,
Karl
Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.
RE: Firmware is not accessible "This web property is not accessible via this address."
I will try to get in contact with Prusa chat because its still giving me the same error. Thanks!
RE: Firmware is not accessible "This web property is not accessible via this address."
I downloaded it here:
https://github.com/prusa3d/Prusa-Firmware/releases/tag/v3.12.2
--------------------
Chuck H
3D Printer Review Blog