Notifications
Clear all
Extruder gets pushed into bed after extruder upgrade
I did the extruder upgrade last night with the parts that came with the MMU2. Fired it up, did a self test, and the printer runs the Z axis all the way down and tries to put a dent in the steel sheet.
What did I do wrong?
Napsal : 06/10/2018 8:36 pm
Re: Extruder gets pushed into bed after extruder upgrade
pinda too high?
I have a Prusa,therefore I research.
Napsal : 06/10/2018 9:56 pm
Topic starter
answered:
Re: Extruder gets pushed into bed after extruder upgrade
pinda too high?
That was my guess so I have it waaaaaay down now, nearly even with the nozzle, and I'm rerunning the calibration.
Napsal : 06/10/2018 10:16 pm
Topic starter
answered:
Re: Extruder gets pushed into bed after extruder upgrade
That must have been it. We're fixed.
Napsal : 06/10/2018 10:40 pm
Re: Extruder gets pushed into bed after extruder upgrade
nice
I have a Prusa,therefore I research.
Napsal : 07/10/2018 12:41 am