Notifications
Clear all

Error in firmware update  

  RSS
gkas
 gkas
(@gkas)
Estimable Member
Error in firmware update

I just attempted to flash my MK3S with the latest firmware update (3.9.3). I performed the update from my laptop via PrusaSlicer. The update finished successfully and performed an automatic self test. Thing seemed to go wild. It went through several endless loops with the message that 'old settings found, using them'. I reset the printer and it seemed to continue..... until more loops. The latest is 'Error - Static memory has been overwritten'. I've reset, powered down, and no stopping it. I reflashed, which said war successful, and still the 'memory overwritten' message won't stop. 

Right now, I'm dead in the water. Help...... 😥 

Publié : 14/01/2021 2:29 am
gkas
 gkas
(@gkas)
Estimable Member
Topic starter answered:
RE: Error in firmware update

Ijust found the reset procedure..... In process of reflashing.

Publié : 14/01/2021 2:41 am
gkas
 gkas
(@gkas)
Estimable Member
Topic starter answered:
RE: Error in firmware update

That resolved the problem. Reset with 'ALL DATA'. Full calibration with full reset.

Publié : 14/01/2021 3:16 am
Snympi
(@snympi)
Active Member
RE: Error in firmware update

Problem resolved with 3.9.3 working?

Publié : 14/01/2021 9:21 am
gkas
 gkas
(@gkas)
Estimable Member
Topic starter answered:
RE: Error in firmware update

Yes, all seem to be working correctly.

Publié : 14/01/2021 9:24 am
Snympi a aimé
alkajefry063
(@alkajefry063)
New Member
RE: Error in firmware update

Truly, all appear to be working accurately.

Publié : 15/01/2021 4:06 pm
Partager :