Notifications
Clear all
Color Change Layer Shift
I'm hoping someone can help troubleshoot my issue. I am getting layer shifts whenever I perform a color change (using PrusaSlicer 2.7.0 with the color change feature and firmware 3.13.2). I have checked my belts for proper tensioning, checked the grub screws, and cleaned my rods. I have also tried flashing old firmware (3.12.2, 3.11.0, 3.10.1, and 3.9.2) but the layer shift still persists. I checked the gcode to make sure that the color layer returned to the correct location, but couldn't find anything that would cause this.
Does anyone have a suggestion of how I might solve?
Publié : 30/11/2023 2:59 pm