After firmware upgrade, resume from pause not possible via printer screen but is via octoprint console
Upgraded to firmware "prusa3d_fw_MK3S_MK3S+_3_13_3_7094" on my MK3S yesterday and went to pause a print to lubricate my printer (very noisy with filling in layers) and when the printer paused, it did not move off the printed part, and after about 3 seconds, the pause went away and there was no resume capability. Using Linux PrusaSlicer-2.7.4.
I usually use Octoprint so went to the octoprint page and was able to restart, resume or cancel the job. I hit resume and it started right up. Wondering why there is no resume capability on the printer control when i paused the job from there. Also wonder why when i paused the job the nozzle didn't move to home vs sitting melting the printed part.
Is this a new bug in the firmware or a problem with the PrusaSlicer not including gcode for what happens when a print is paused (for whatever reason, change filament, lubricating printer, cleaning goobers, ....).
Didn't see a similar issue in search so creating new question. Thanks for your help