abs clogged in ptfe, changed ptfe but hotend will not go over 200c, nozzle wont screw all the way in
 
Notifications
Clear all

abs clogged in ptfe, changed ptfe but hotend will not go over 200c, nozzle wont screw all the way in  

  RSS
the-sh1z
(@the-sh1z)
Eminent Member
abs clogged in ptfe, changed ptfe but hotend will not go over 200c, nozzle wont screw all the way in

abs filament clogged the ptfe so i swapped it out. i put it all back together and now hotend will not go over 200c, and even though the nozzle feels fully screwed all the way in there are still threads showing. any assistance appreciated!

Posted : 19/08/2020 1:07 am
Share: