Avisos
Vaciar todo

Top solid layers create bulge/lip  

  RSS
dhavener
(@dhavener)
Active Member
Top solid layers create bulge/lip

Hello All, 

New to printing here and I've noticed that when I print, the top solid layers will start to budge out with each progressive layer and create a visible lip at the tops of my parts. I've attached some images for reference and I have been using the default settings for PLA and PETG. I've been using the default settings for everything but I can provide the slicer file or whatever helps you help me. This occurs with different filament types and brands. 

I cannot figure this out! 

Thanks!

Este debate ha sido modificado el hace 2 years por dhavener
Respondido : 07/03/2023 5:02 am
Diem
 Diem
(@diem)
Illustrious Member

Please save your project as a .3mf file

Files > Save Project as

Zip the .3mf and post it here. It will contain both your part and your settings for us to diagnose.

Cheerio,

Respondido : 07/03/2023 2:00 pm
Neophyl
(@neophyl)
Illustrious Member
RE: Top solid layers create bulge/lip

Search "buldge" on here.  Wrong spelling I know but its the term you need to search for.

Respondido : 07/03/2023 2:41 pm
dhavener me gusta
dhavener
(@dhavener)
Active Member
Topic starter answered:
RE: Top solid layers create bulge/lip

Hello, thanks for the reply. I can post the .3mf file when I get home. I am just using the default .15 quality setting.

I will also post pictures of each corner along with the corresponding axis direction because each corner looks different 

Respondido : 07/03/2023 3:13 pm
dhavener
(@dhavener)
Active Member
Topic starter answered:
RE: Top solid layers create bulge/lip

Front Left (Origin) Back left (+y) Back right (+x, +y) Front right (+x)

From the pictures front left has an overhang on top and slight undercut on bottom. Back left has an overhang on top (not as severe) and slight undercut on bottom. Back right has an overhang on top and slight undercut on bottom. Front right has an overhang on top and elephants foot on bottom. 

 

Hope this is helpful

Respondido : 07/03/2023 3:32 pm
dhavener
(@dhavener)
Active Member
Topic starter answered:
RE:

Hello, Ive attached the .3mf file

Esta publicación ha sido modificada el hace 2 years 2 veces por dhavener
Respondido : 08/03/2023 12:47 am
Compartir: