Avisos
Vaciar todo

Proper way to cancel a print job  

  RSS
Hossman12
(@hossman12)
New Member
Proper way to cancel a print job

What is the proper way to cancel a running print job on the MK3S?  

 

 

Respondido : 28/09/2020 2:19 pm
bobstro
(@bobstro)
Illustrious Member
RE: Proper way to cancel a print job

You can cancel jobs via the front panel mid-print and it will do an orderly shut down. Pressing the reset button works in an emergency, but may leave the hot nozzle near the partial print and require a bit of cleanup.

My notes and disclaimers on 3D printing

and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan

Respondido : 28/09/2020 2:45 pm
jsw
 jsw
(@jsw)
Famed Member
RE: Proper way to cancel a print job

There are PAUSE and STOP options.  Press the selector and scroll down.

PAUSE will raise the head and will give you the options to resume or stop.

Respondido : 28/09/2020 3:59 pm
cwbullet
(@cwbullet)
Miembro
RE: Proper way to cancel a print job

I personally prefer the pause.  

--------------------
Chuck H
3D Printer Review Blog

Respondido : 28/09/2020 4:41 pm
karl-herbert
(@karl-herbert)
Illustrious Member
RE: Proper way to cancel a print job
Posted by: @cstepe12prusa

What is the proper way to cancel a running print job on the MK3S?  

 

 

First pause, then think again if I really want to stop, then stop if necessary. The same is also possible in Octoprint, for example.

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Respondido : 28/09/2020 5:52 pm
Hossman12
(@hossman12)
New Member
Topic starter answered:
RE: Proper way to cancel a print job

Thanks for the answer.  Don't know how I missed that looking through the menus.

Respondido : 30/09/2020 3:30 pm
bret
 bret
(@bret)
New Member
RE: Proper way to cancel a print job
Posted by: @bobstro

You can cancel jobs via the front panel mid-print and it will do an orderly shut down. Pressing the reset button works in an emergency, but may leave the hot nozzle near the partial print and require a bit of cleanup.

You mentioned there's a bit of cleanup when using reset. If I reset (either on purpose or accident), how can I get the printer head to lift up so that I can clean up the printer bed? Is there a forum post on the process for that? I can't seem to find an answer online or in the forums and I've hastily hit reset before (though, I'm definitely going to use pause and stop knowing that it will raise the head now). I've also scoured the menus from what I can see/tell.

Respondido : 23/10/2020 8:55 pm
JoanTabb
(@joantabb)
Veteran Member Moderator
RE: Proper way to cancel a print job

to lift the Print head, easily. 
when the printer is at rest, press and hold the rotary knob, and the display will change to 

Z:      ??.??    where ??.?? are the height of the Z axis....    

then rotate the control knob to raise the Z axis.... 

Note, if you have just pressed the reset (X) button,     Z will show as 00.00 no matter what level the Z axis is actually at... 

this is because the printer doesn't know where the Axis are, when you press reset.    You need to home all axis before the printer will know where the axis are, again...

regards Joan

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Respondido : 23/10/2020 11:24 pm
bret me gusta
bret
 bret
(@bret)
New Member
RE: Proper way to cancel a print job

@joantabb

Thank you so much! That's extremely helpful 🙂

Respondido : 24/10/2020 12:05 am
Compartir: