Notifications
Clear all

power to external usb  

Page 2 / 2
  RSS
Stefan
(@stefan-12)
Active Member
Re: power to external usb

Sorry guys, but a RPi 3 does by no means draw 2.5A@5V, not even at full load. The official power supply for the Pi provides that much to power external USB hardware.

To give you some actual figures: with no external USB devices and and only either Ethernet or Wifi in use and CPU mostly idle, the RPi 3b draws around 270mA or 1.35W. Even with a horribly bad 70% DC/DC converter efficency, this would only add 2W additional load to the PSU. Neglectable, I'd say.

Publié : 01/05/2018 8:00 pm
Page 2 / 2
Partager :