Other Resources?
Hi All, I just Ordered my MK3S a couple days ago, and was wondering if someone has link’s to other good learning resource on the web? Thanks!
RE: Other Resources?
I've got some notes here that you might find useful.
and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan
RE: Other Resources?
I've got some notes here that you might find useful.
Unfortunately, a number of the links in your notes are dead...
RE: Other Resources?
Unfortunately, a number of the links in your notes are dead...
The on-site links should be OK. A lot of the Prusa links have changed. Any specifics appreciated.
and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan
RE: Other Resources?
@phd
Thanks!
RE: Other Resources?
This forum. Learn cleaning steel sheet and first layer calibration.
Youtube.
RE: Other Resources?
@phd
https://all3dp.com/2/best-3d-printing-forums-boards-and-groups/
Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.
RE: Other Resources?
Lots of tutorials out there on the Interwebs, which may or may not apply to the Prusa.
There's the reprap.org forum which has a wiki, some of which is very good, but some is quite skeletal.
RE: Other Resources?
@jsw
Thanks I’ll have a look!
RE: Other Resources?
I would get familiar with the MK3s Manual
Also some great Prusa channels on YouTube:
Prusa
Thomas Sanladerer has a new beginners series sponsored by Prusa - good info on all aspects Prusaslicer etc.