Notifications
Clear all

Other Resources?  

  RSS
Tony3d
(@tony3d)
Active Member
Other Resources?

Hi All, I just Ordered my MK3S a couple days ago, and was wondering if someone has link’s to other good learning resource on the web? Thanks!

Posted : 17/07/2020 8:35 pm
bobstro
(@bobstro)
Illustrious Member
RE: Other Resources?

I've got some notes here that you might find useful.

My notes and disclaimers on 3D printing

and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan

Posted : 17/07/2020 8:42 pm
Phil D.
(@phil-d)
Estimable Member
RE: Other Resources?
Posted by: @bobstro

I've got some notes here that you might find useful.

Unfortunately, a number of the links in your notes are dead...

Posted : 17/07/2020 9:19 pm
bobstro
(@bobstro)
Illustrious Member
RE: Other Resources?
Posted by: @phd

Unfortunately, a number of the links in your notes are dead...

The on-site links should be OK. A lot of the Prusa links have changed. Any specifics appreciated.

My notes and disclaimers on 3D printing

and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan

Posted : 17/07/2020 9:26 pm
Tony3d
(@tony3d)
Active Member
Topic starter answered:
RE: Other Resources?

@phd

Thanks!

Posted : 17/07/2020 10:54 pm
Peter M
(@peter-m)
Noble Member
RE: Other Resources?

This forum. Learn cleaning steel sheet and first layer calibration.

Youtube.

Posted : 19/07/2020 5:11 pm
karl-herbert
(@karl-herbert)
Illustrious Member
RE: Other Resources?

@phd

Maybe you will find something interesting here:

https://all3dp.com/2/best-3d-printing-forums-boards-and-groups/

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Posted : 19/07/2020 5:18 pm
jsw
 jsw
(@jsw)
Famed Member
RE: Other Resources?

Lots of tutorials out there on the Interwebs, which may or may not apply to the Prusa.

There's the reprap.org forum which has a wiki, some of which is very good, but some is quite skeletal.

Posted : 19/07/2020 8:27 pm
Tony3d
(@tony3d)
Active Member
Topic starter answered:
RE: Other Resources?

@jsw

Thanks I’ll have a look!

Posted : 19/07/2020 8:29 pm
Holck
(@holck)
Eminent Member
RE: Other Resources?

I would get familiar with the MK3s Manual

Also some great Prusa channels on YouTube:
Prusa
Thomas Sanladerer has a new beginners series sponsored by Prusa - good info on all aspects Prusaslicer etc.

Posted : 19/07/2020 8:40 pm
Share: