Benachrichtigungen
Alles löschen
Seite 2 / 2
Vorherige
RE: MK3 with Input Shaping as fast as Bambulabs
I put everything in my github!
Let me know how it goes!
Hi filavandrel!
I couldn't find the images of where to install the accellerometer to the RPIZ2W. Could you alaborate on the pinout?
BR, Magnar.
Veröffentlicht : 06/01/2024 4:29 pm
RE: MK3 with Input Shaping as fast as Bambulabs
Hello @filavandrel
To echo Magnar, in your GitHub posting, in the section "For Pi zero users, solder the headers onto the pi per Prusa's official instructions but do not plug it into the einsy board yet.", 4. B & C read:
"b. If you want to use input shaping then we'll solder on our header to this position [insert image of pi + pins here]
c. [crimp wire instruction]"
And yet there is no image of the pins and no wire crimp instructions.
Help!
@CMR_542714
Veröffentlicht : 10/01/2024 11:49 pm
RE:
Hi!
Just used this one from a youtube video.
Diese r Beitrag wurde geändert Vor 10 months von Magnar Tharaldsen
Veröffentlicht : 03/02/2024 5:06 pm
Seite 2 / 2
Vorherige