Firmware updated with a broken screen
I am the third owner of this MK3. It has a cracked screen. I have been trying to get it back into a healthy shape so I can donate it to a worthy user or school.
In my pursuit to get it up and running, I decided to try PrusaLink/PrusaConnect. It requires firmware 3.10+. So I flashed the latest firmware from prusa slicer.
The screen seems to be wanting me to set something up via the wheel. But I can't read it. I am trying to connect via PrusaLink, but I'm getting "NOT USABLE" on the correct port.
Is there a guide somewhere to what the screen might be asking me, so I can answer with the little wheel?
Is there a way to bypass the init screen via some command over the USB?
Thanks in advance. I am a Linux user, software engineer, and experienced 3D printer (but this is my first Original Prusa).
RE: Firmware updated with a broken screen
I went ahead and clicked through the screen without knowing what I was agreeing to. I think it was doing some self checks. But once it reached the info screen (I can read a few characters), it was able to connect. So that fixed the immediate issue related to this question.
I am trying to do things like calibrate the Z offset. But it doesn't seem to be available anywhere but in the screen. Is that correct? I guess I should order a new screen.
RE: Firmware updated with a broken screen
ask if anyone local has a spare screen from a 3.5 0r 3.9 upgrade...
Joan
I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK
RE: Firmware updated with a broken screen
That's a good idea. Anyone in the Denver metro area that would have a spare MK3 screen?