Notifiche
Cancella tutti
Pagina 2 / 2
Precedente
Re: filament sensor issues - updated part coming in may...
New sensor is rev 0.2e. Don't know if i can share a picture, but it's working fine 🙂
The schematic for Rev 0.2e are up on Github - no secrets here.
https://github.com/prusa3d/PRUSA_Laser_filament_sensor/blob/master/rev.02e/laser-sensor.pdf
Postato : 20/05/2018 3:44 am
Pagina 2 / 2
Precedente