Dimensions
What are the flat bed dimensions of the MK3 in mm? What is the vertical dimension in mm? How does PRUSA define these dimensions, and what I am asking specifically is the vertical axis z, x, or y? Thanks
RE: Dimensions
If you read the Prusa MK3/S website, they are called out quite clearly (though using centimeters, not millimeters).
250x210x210 in mm. X,Y,Z(vertical)
RE: Dimensions
Hi, I am thinking on buying my first 3D Printer and of course this would be the MK3S
I want to be sure the place I am thinking for the printer is the correct one. Its a 40 cm depth shelf. The question is if the print bed goes to the back further than the 55 cm stated on the product dimensions.
Also I would need to know the distance between feet, because I am considering having a part of the printer "flying" if you know what I mean.
Thanks for your help!
Fernando
RE: Dimensions
Look for the enclosure thread, there you can see how big you need to go to be safe.
At the back come the cable out of the bed, there should be a update to make this 90 degrees.
At the left side, there is another cable sticking out.
RE: Dimensions
@peter-m26
Is the 90 degree update on GitHub? If so what is it called?
RE: Dimensions
There is prusa enclosure build, with stl files, there you can find this.