Notifications
Clear all
Cool down after filament unload
I have just assembled the MK3s. I like to unload the filament after printing, however, by doing this it interrupts the cool down procedure and the bed and nozzle stay at operating temperature. The only way around this I found is to press the reset button. Surely there is a better way to initiate the shut down (cool down) procedure after ejecting the filament.
Any advice on this would be great - thanks.
John
Publié : 25/04/2021 2:06 am
RE: Cool down after filament unload
If you open the "Preheat" menu and scroll down to the bottom, you will find a cool down option that sets both temperatures to zero.
Publié : 25/04/2021 2:53 am
Topic starter
answered:
RE: Cool down after filament unload
@kevin-reid
Thanks Kevin, perfect.
Publié : 25/04/2021 2:57 am