Notifications
Clear all

Cool down after filament unload  

  RSS
simo
 simo
(@simo)
Active Member
Cool down after filament unload

I have just assembled the MK3s. I like to unload the filament after printing, however, by doing this it interrupts the cool down procedure and the bed and nozzle stay at operating temperature. The only way around this I found is to press the reset button. Surely there is a better way to initiate the shut down (cool down) procedure after ejecting the filament.

Any advice on this would be great - thanks.

John

Posted : 25/04/2021 2:06 am
kpreid
(@kpreid)
Trusted Member
RE: Cool down after filament unload

If you open the "Preheat" menu and scroll down to the bottom, you will find a cool down option that sets both temperatures to zero.

Posted : 25/04/2021 2:53 am
simo
 simo
(@simo)
Active Member
Topic starter answered:
RE: Cool down after filament unload

@kevin-reid

Thanks Kevin, perfect.

 

Posted : 25/04/2021 2:57 am
Share: