Notifications
Clear all
Periodic Noise on Left Side of Print
I've been having a weird issue with the left side of prints with my new Mk 3. The left side of my prints has periodic noise while the right side is nearly flawless. This causes roughness in my prints on the left side.
I have attached a photo of an example in the first layer calibration where every 4th line of filament is slightly longer on the left side.
All of my self tests have passed. There seems to be nothing wrong with the printer other than this.
Any tips for getting rid of this issue?
Napsal : 12/04/2018 2:38 am
Re: Periodic Noise on Left Side of Print
Check that the set screws are tight on the x-axis motor pulley.
Napsal : 12/04/2018 8:48 am