Notifications
Clear all
Opinions on this PETG
Hi.
I'm using this for first layer cal: https://www.prusaprinters.org/prints/31862-first-layer-calibration-shapes-customizable
Setting differences are attached. I uploaded some high res files here.
Both filament is Overture 1.75mm. I feel I have the PLA sorted quite well and prints seem good but I'm unsure on the PETG, especially the stringing and before I start printing more things in PETG I thought I'd ask the opinions of those more experience than I.
I'm using the PETG settings described here and I'm curious if people have different opinions:
Thanks.
Opublikowany : 20/01/2022 10:06 pm