Notifiche
Cancella tutti
Newbie having first print issues.
Did the calibrations, tried first print and it is a mess. The extruder dragged the printed filament around and I finally stopped the print. I used brand new PETG and the textured plate.The print was the PRUSA logo. Any suggestions greatly appreciated.
Postato : 09/02/2024 4:02 pm
Topic starter
answered:
RE: Newbie having first print issues.
Fixed it - finer calibration to -1870 and clean bed well.
Postato : 10/02/2024 8:19 pm