Avisos
Vaciar todo

Inconsistent extrusion of the filament  

  RSS
Luca
 Luca
(@luca-2)
New Member
Inconsistent extrusion of the filament

Hello,

I left my Prusa i3 Mk3S unattended while printing A box for under Prusa i3 Mk3S.

This resulted in a big block of plastic under the nozzle and when I pulled that out I noticed that the two white wires connected to the hotend broke so I had to connect them again.

 

After connecting them I still have the issue that the filament is not extruding correctly as it can be seen in the following video:

https://drive.google.com/file/d/1bSX43Wge8AOcJNa2XB3-DPNABKUmjTua/view?usp=sharing

I hope that someone can give me a tip on how to solve the issue.

Thank you!

Este debate ha sido modificado el hace 4 years por Luca
Respondido : 27/12/2020 12:49 pm
Luca
 Luca
(@luca-2)
New Member
Topic starter answered:
RE: Inconsistent extrusion of the filament

I added these, maybe someone with experience can spot the issue.

Respondido : 27/12/2020 10:07 pm
Compartir: