Help me troubleshoot this.
My prints consistently have an uneven area in the same place on the same print. I have leveled the bed and checked the belts. Any ideas on how to troubleshoot this? It is the same with PLA and PETG.
Thanks for any suggestions.
RE: Help me troubleshoot this.
Maybe some filament debris in de drive belt on that spot?
Please save your project as a .3mf file
Files > Save Project as
Zip the .3mf and post it here. It will contain both your part and your settings for us to diagnose.
Cheerio,
RE: Help me troubleshoot this.
The first thing I would do, if this were my issue, is to reprint one of the affected prints at a slightly different location on the build plate.
That should determine if the issue is related to the model/slicing/etc. or the mechanical aspects of the machine.
RE: Help me troubleshoot this.
Thanks for the help!
I will check the belt and then reprint in a different location. If I still have this issue, I will upload the .3mf.