Notifications
Clear all
First Benchy print after assembly of MK3S+
Hi all,
this is my first benchy printed straight from the gcode that came on the SD card.
I am not sure why the layers don’t look uniform. Any ideas on what I can adjust/tune to get better looking layers?
I can get better looking prints out of my mini currently and I imagine the MK3S+ could put out better prints.
Thanks!
Publié : 14/11/2021 5:12 pm
RE: First Benchy print after assembly of MK3S+
That looks like a combination of slightly damp filament and imperfectly tightened drive belts.
Cheerio,
Publié : 14/11/2021 7:56 pm
Topic starter
answered:
RE: First Benchy print after assembly of MK3S+
Thanks for the reply!
I will try tightening the X & Y Belts. Thanks!
Publié : 14/11/2021 8:07 pm
Make your next print this:
https://www.prusaprinters.org/prints/46639-tension-meter-for-the-gt2-belts-of-i3-mk3s-or-prus
It MUST be printed with Prusament PETG to have the correct deflection.
Cheerio,
Publié : 15/11/2021 12:25 am