Notifications
Clear all
Bed leveling/underextrusion
Hi All,
I am seeking the wisdom of all you experienced 3d printers. I am having an underextrusion issue on the left side of the build plate, as seen in the photo attached. I have tried adjusting the idler tension spring, cleaned the bondtech gears, even performed the nylock mod upgrade and adjusted the temperature of the hot end, all to no avail.
Someone please help as I am getting frustrated printing this calibration with minimal improvement in progress.
Thanks in advance to all those that help. 
Calibration print
Posted : 20/08/2025 3:06 am