Prusa MK3.9 - MMU3 runs very well
Hello Mr. Prusa,
please finally release the new firmware and the slicer for the MK3.9. We have been printing with it for 2 weeks without interruption and yes, we have threads with some filaments. But you can fix them very easily without stopping printing. This is absolutely not critical. We have not yet broken off a part or the print has failed. We are now also familiar with the errors that occur when printing colored areas that are too small, etc... But none of this can be compared with the MMU2 of the last few years.
We can all live with it if you say it's beta. But use our experience. I'm currently running a 2.4 day print with PLA and have only had 2 stops because of a piece of lint left over from the filament. The error costs 1 minute and it goes on. So please release a beta for us. Everyone wants to print more colors again.
RE: Prusa MK3.9 - MMU3 runs very well
Where did you get the cable from?
RE: Prusa MK3.9 - MMU3 runs very well
my son made it self 😉 really good on both 3.9 printers
RE: Prusa MK3.9 - MMU3 runs very well
Where did you get the cable from?
You cn buy it from prusa now. It works with 3.5 3.9 and the 4 https://www.prusa3d.com/en/product/mmu3-printer-cable-for-mk3-5/
Please help me out by downloading a model it's free and easy but really helps me out https://www.printables.com/@Hello_474427/models
RE: Prusa MK3.9 - MMU3 runs very well
and now only the software release and the slicer release for the 3.9 printer are missing.