MK4 Loses X position
MK4 loses X position when printing. This appears that the printer forgets where the extruder is.
Printed some Prusament CF+PC (although I have had this with PETG) and got major layer shifting in the X direction. This prints fine with my MK3/S. See Photo.
Belts are tight, firmware is 5.1.2, Prusaslicer is latest. I have attached GCode.
HELP!
Senior Life member of IEEE.
RE: MK4 Loses X position
Forgot to include the 3mf file. Here it is.
Senior Life member of IEEE.
RE: MK4 Loses X position
More info.
I re-sliced the model for an MK3/S+ and ran it on the MK4. No layer shifting. Same machine, different slicing and probably different path through the firmware.
However, about 1/2 way through the printing, I get a notice to change filament. I never requested a filament change anywhere, so this is strange, since I am using the same filament for the entire model (CF+PC).
I don't know whether the printer firmware is screwed up, or Prusaslicer.
Any suggestions?
Steve
Senior Life member of IEEE.