Notifications
Clear all
Filament makes blob on nozzle when purging
Earlier today I got several Stuck Filament faults. I cleaned the nozzle and then ran the Loadcell self test, which passed. Before that happened, a filament purge resulted in a nice thread of filament dropping from the nozzle and curling up on the bed, same as always. Now it wraps itself up at the bottom of the nozzle making a small blob. I've tried more cleaning with a brass brush and cleaning needle, but no change.
Otherwise the printer has been printing okay but clearly something is not right. Any suggestions?
Thanks.
Posted : 29/10/2025 11:44 pm