Unable to connect to printer for Firmware Upgrade
 
Notifiche
Cancella tutti

Unable to connect to printer for Firmware Upgrade  

  RSS
lee.b2
(@lee-b2)
New Member
Unable to connect to printer for Firmware Upgrade

I have a Prusai3 MK2. I am running Mac OS. I have been unable to get the firmware updater to connect to the printer. It does not show up in the serial port drop down box. I have tried Pronterface and I don't see it there either. My USB ports work on my Mac, I even tried another Mac, and Tried booting Win 10 (I have win 10 dual boot on my Mac) all to no avail. I tried resetting the printer, still could not see the printer. I am plugged in with the USB B cable that came with the printer.

Thanks

Postato : 04/01/2018 11:41 pm
JoanTabb
(@joantabb)
Veteran Member Moderator
Re: Unable to connect to printer for Firmware Upgrade

mine didn't connect to Win10 first time... then later it did connect... I don't recall changing anything.

have you tried leaving the usb connected and re booting the MAC?
the printer might appear when the computer comes back to life!

I know next to naff all about Macintosh, but a surprising number of problems dissapear with a simple reboot!

regards Joan

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Postato : 05/01/2018 1:44 am
Condividi: