problem with tpu printed parts
Hi!! I 'm trying to print with tpu filament and it works quite well, but every time i print curved edges of more than 3/4 mm radius, the filament printed retires itself to the inside and give me the problem in the picture. I tryed to increase the temperature and to reduce the speed, but it there still be...what should i do? The layers high is 0.1 with 0.4 nozzle.
Re: problem with tpu printed parts
Hello Emanuele!
Well it is hard to tell with that limited information of the problem... It could be due to that radius is not printing well because of the machine has no support under the layers it is printing at the moment.
Can you post more pictures from different angles and tell how the part was laying on the print bed when printed?
/Henrik
Re: problem with tpu printed parts
Hello Emanuele!
Well it is hard to tell with that limited information of the problem... It could be due to that radius is not printing well because of the machine has no support under the layers it is printing at the moment.
Can you post more pictures from different angles and tell how the part was laying on the print bed when printed?
/Henrik