Notifications
Clear all
Lost of bed calibration
I have two of these in a production environment( running 24/7). On the second print of the morning the oldest one, about a month old, Failed to calibrate correctly on the start of the print. I crashed the head in the bed on points 7, 8, 9. The Y axis was off by about 20mm so it missed the inserts in the bed. We reset the processor and it calibrated correctly.
But, problems still existed. the Z calibration was off. Had to do a live Z cal to get it back working.
Firmware is 3.0.3
Posted : 30/06/2016 6:27 pm