Notifications
Clear all

[Closed] Lead-screw specifications  

Page 2 / 2
  RSS
spark
(@spark)
Reputable Member
Re: Lead-screw specifications


During a deep check of my MK2S to fix my wobble issue, ...

Can you link to your post on your wobble issues? Lead screw having slight bit of skew causing tip to rotate axially off center (wobble?) is not a huge problem for print accuracy as X-location is provided by vertical linear rods and bearings. I'm not going into wobble as that isn't this thread's topic. But just quickly, you can adjust where the lead-screw points by moving the lead-screw nut within the slack of it's mounting screws. I've solved my z-axis-top rattle by this method. There should be nothing loose on your printer, ever. All moving parts should be tight but lubricated. 😉

MK2S kit owner since 8/15/2017

Posted : 03/01/2018 5:55 pm
Bigdogbro1
(@bigdogbro1)
Estimable Member
Re: Lead-screw specifications

Has anyone tried the anti-backlash type lead screw nuts on the Z-axis?

Something like these:
https://www.smw3d.com/acme-anti-backlash-nut/

Not sure they will fit the end brackets but thought I'd ask.

MK3 Kit, Designed, built 4x4 CNC Plasma Cutting Table, Motorcycles Bigdogbro's Adventures
http://www.youtube.com/channel/UC5djrxBeeOKB9_6rHnn6G8A

Posted : 21/01/2018 2:09 pm
john.n13
(@john-n13)
Estimable Member
Re: Lead-screw specifications

Something like these:
https://www.smw3d.com/acme-anti-backlash-nut/

This supplier doesn't seem to have versions for trapezoidal threads, only ACME. Perhaps an EU supplier will?

Posted : 21/01/2018 2:57 pm
bulidesber.s
(@bulidesber-s)
New Member
Re: Lead-screw specifications

Is this right?

Lead Screw & Nut

My stepper motor site: skysmotor.com

Posted : 27/06/2018 9:22 am
MTJC
 MTJC
(@mtjc)
Trusted Member
Re: Lead-screw specifications


Martin

8mm diameter, 8mm pitch, 4 threads

Peter

What does "4 threads" mean?

Posted : 16/02/2019 6:04 am
PJR
 PJR
(@pjr)
Antient Member Moderator
Re: Lead-screw specifications



Martin

8mm diameter, 8mm pitch, 4 threads

Peter

What does "4 threads" mean?

Rather than having a single thread of 2mm pitch, there are 4 threads running in parallel, each with an 8mm pitch. AKA four-start.

Peter

Please note: I do not have any affiliation with Prusa Research. Any advices given are offered in good faith. It is your responsibility to ensure that by following my advice you do not suffer or cause injury, damage…

Posted : 16/02/2019 11:34 am
MTJC
 MTJC
(@mtjc)
Trusted Member
Re: Lead-screw specifications




Martin

8mm diameter, 8mm pitch, 4 threads

Peter

What does "4 threads" mean?

Rather than having a single thread of 2mm pitch, there are 4 threads running in parallel, each with an 8mm pitch. AKA four-start.

Peter

Ahh, ofc. Thank you for explaination PJR! 😀

Posted : 16/02/2019 1:37 pm
Jakymiwm
(@jakymiwm)
New Member
RE: Lead-screw specifications

Pololu has copper alloy ones Tr8×8(P2).

 

https://www.pololu.com/product/2688

 

Posted : 21/01/2020 7:44 pm
Page 2 / 2
Share: