Is it a material tweaking thing, or what?
 
Notifications
Clear all

Is it a material tweaking thing, or what?  

  RSS
Sniglet
(@sniglet)
Active Member
Is it a material tweaking thing, or what?

IMG_1865 by Corvette Mike, on Flickr

On the left is, literally, the prettiest Benchy I've ever printed, in PLA, using the most recent Prusa-specific Slic3r.

On the Right is the Benchy I printed just before, in ABS. You can tell there's a pretty considerable difference in quality.

I don't have much ABS and what I do have isn't fresh, but I've also notices the parts cooling fan doesn't run while the printer is printing ABS (yeah, I know it's a PLA feature, but a little part cooling can really help with...well, things like the smokestack on Benchy here.

Is it unrealistic to expect the same quality Benchy in ABS as PLA? Is it a niche for tweaking, or just too much to expect for the material? Do you get awesome Benchy results with brand new out-of-the-bag ABS?

Publié : 15/12/2016 1:36 pm
john.m7
(@john-m7)
Eminent Member
Re: Is it a material tweaking thing, or what?

You generally wont get as much detail in ABS as PLA - but there's no hard and fast rule - but its benchy hes supposed to be a stress test 🙂

Publié : 15/12/2016 1:39 pm
Sniglet
(@sniglet)
Active Member
Topic starter answered:
Re: Is it a material tweaking thing, or what?

I'm completely okay with PLA = Pretty, ABS = Structural

Publié : 15/12/2016 1:58 pm
Carsten
(@carsten-2)
Estimable Member
Re: Is it a material tweaking thing, or what?

ABS needs to be printed slower here (chimney melted). You cant use the fan, so play with the autocool to slow down more when the layer time is dropping. Maybe it is even then not enough for that detail with ABS

Carsten

My Prints: https://www.prusaprinters.org/social/15695-carsten/prints
My Employer: https://make-magazin.de

Publié : 15/12/2016 2:26 pm
Partager :