Notifications
Clear all

Pursa Mk3 New user Printing Pursa PET problems  

  RSS
CNCRC
(@cncrc)
Active Member
Pursa Mk3 New user Printing Pursa PET problems

Hi All
Thanks for reading this I have looked but cannot find the answer to my issue it could be out there however thought I would just ask if it is out ther please point me in the correct direction.

1. Printer is great PLA ABS no issues
2. Wanting to print the LACK table parts in Pursa PET Orange to match the printer
3. I'm using the Pursa silc3r slicer using the default Pursa settings for PET
4. First i had an issue with the first layer and found out that you my have to increase your Z height which has seamed to help with the first layer.
5. Now the key issue the infill is just a mess it will print however it does blob or misses part of the infill out.
6. So now the big question id the default infll speed at 200ms in the pursa settings just to fast or am i missing something.

Many thanks in advance
Regards Mark

Posted : 24/09/2018 3:41 pm
bobstro
(@bobstro)
Illustrious Member
Re: Pursa Mk3 New user Printing Pursa PET problems

Answered in the other thread.

My notes and disclaimers on 3D printing

and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan

Posted : 24/09/2018 4:30 pm
Share: