Notifications
Clear all
Layer Adhesion PLA
Hey guys! I’ve been having an issue lately where my parts aren’t sticking together. I will try an provide all relevant info I can. Also I have attached some pics of the model after being printed. Let me know if I can provide more info!
AMZ3D white PLA
Bed temp 50
Nozzle 195
It is in an enclosure
Part cooling fan at 100%
I have also tried slowing the print down 20%
Sliced with S3D
Publié : 14/07/2018 5:43 pm
Re: Layer Adhesion PLA
I wold say 195°C is too cold for that big a part and additional fan running full power where
there is not any need for with no overhangs and such.
I use 215°C for both my PLA which I get here in Germany locally and the ones from eumakers.com.
Publié : 14/07/2018 7:04 pm