Notifications
Clear all

Layer Adhesion PLA  

  RSS
Deadlysquirrel
(@deadlysquirrel)
Active Member
Layer Adhesion PLA

Hey guys! I’ve been having an issue lately where my parts aren’t sticking together. I will try an provide all relevant info I can. Also I have attached some pics of the model after being printed. Let me know if I can provide more info!

AMZ3D white PLA
Bed temp 50
Nozzle 195
It is in an enclosure
Part cooling fan at 100%
I have also tried slowing the print down 20%
Sliced with S3D

Posted : 14/07/2018 5:43 pm
alexander.s27
(@alexander-s27)
Estimable Member
Re: Layer Adhesion PLA

I wold say 195°C is too cold for that big a part and additional fan running full power where
there is not any need for with no overhangs and such.
I use 215°C for both my PLA which I get here in Germany locally and the ones from eumakers.com.

Posted : 14/07/2018 7:04 pm
Share: