Changed some parts - impossible to print supports or small parts
 
Notifications
Clear all

Changed some parts - impossible to print supports or small parts  

  RSS
Carlos Alberto
(@carlos-alberto)
Active Member
Changed some parts - impossible to print supports or small parts

Hello.. I need some help please...  I came into some trouble and had to replace the Heatbreak, Heater Block and nozzle on my Prusa MK2S and Hatchbox PLA..

 

Right now I've installed these parts:

E3D Nozzle X: https://www.filastruder.com/products/e3d-nozzlex?_pos=1&_sid=a4bc0d9f4&_ss=r

Titanium V6 Heatbreak: https://www.amazon.com/gp/product/B07X9NTSZD/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1

Geniune E3D Heater Block: https://www.amazon.com/gp/product/B07CYZ1ZBW/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1

 

Here are my printer Settings: https://imgur.com/a/hxqXNvu

Here are my print results: https://imgur.com/a/nuxMc6O

 

As you can see... printing stuff without supports I have mostly no problems.  The benchies are mostly ok, but one of the pilars seems to have a problem....  My main issue is printing supports or small details.... I have tried printing from 195C to 210C these parts and they all mess up.  I tried also printing a Lattice Cube from Makers Muse ( https://www.google.com/search?q=lattice+cube+makers+muse&rlz=1C1CHBF_enPA890PA890&sxsrf=ALeKk03uFhYUL86ytOFg2l_hGyqok2Woig:1590515752800&source=lnms&tbm=isch&sa=X&ved=2ahUKEwjW49HzjNLpAhVScq0KHam-CswQ_AUoAXoECDQQAw&biw=1396&bih=646#imgrc=N_oqj6QtNXyNJM ) and cannot past the base....

 

Can anyone shed some light please on what other sthings I should try to get the printer woking?  I really appreciate your help!

 

Thanks,

 

Carlos

 

Napsal : 26/05/2020 5:59 pm
Carlos Alberto
(@carlos-alberto)
Active Member
Topic starter answered:
RE: Changed some parts - impossible to print supports or small parts

Nevermind.... the fan gave me an error when doing self-test... time to check and possibly replace the fan...

 

Thanks

Napsal : 26/05/2020 7:17 pm
Share: