Your printer's firmware reported an error. Due to that OctoPrint will disconnect. Reported error: EEPROM CRC mismatch - (stored) 59350 != 55137 (calculated)!  

Your printer's firmware reported an error. Due to that OctoPrint will disconnect. Reported error: EEPROM CRC mismatch - (stored) 59350 != 55137 (calculated)!

I installed Octoprint on a Raspberry Pi 4B by following the instructions...

Everything looks right until I sent the first print. The I got a temperature error and Octoprint disconnected... ever since that happened I get the same error and most of the posts out there do not seem to help much...

I have a Ender 5 Plus with Firmware 1.70.2 BL and Silent Board

System Information

Please copy/paste the following when requesting support on the forums or when opening a new bug report:

browser.user_agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/95.0.4638.17 Safari/537.36

connectivity.connection_check: 1.1.1.1:53

connectivity.connection_ok: true

connectivity.enabled: true

connectivity.online: true

connectivity.resolution_check: octoprint.org

connectivity.resolution_ok: true

env.hardware.cores: 4

env.hardware.freq: 1500

env.hardware.ram: 3959984128

env.os.bits: 32env.os.id: linux

env.os.platform: linux

env.plugins.pi_support.model: Raspberry Pi 4 Model B Rev 1.4

env.plugins.pi_support.octopi_version: 0.18.0

env.plugins.pi_support.throttle_state: 0x0

env.python.pip: 20.3.3env.python.version: 3.7.3

env.python.virtualenv: true

octoprint.safe_mode: false

octoprint.version: 1.6.1

systeminfo.generator: systemapi