Avisos
Vaciar todo
Converting Mk42 to magnetic bed .
Hi to all the members.
I was having some Mk42 heatbeds with me and just thought to convert the same to magnetic one .
For that I got my Mk42 cnc routed for magnet slots.
Now its a magnetic MK42 heat bed and I am planning to use the same in my prusa mk2.5 .
Attachment removed
Respondido : 21/09/2019 8:28 am
Topic starter
answered:
RE: Converting Mk42 to magnetic bed .
Can any one help me in the firmware part.
I know that the mk52 heatbed points are in different location that Mk42 and i just want your help to understand the changes required in firmware ,so that I can use the same with my Mk2.5.
Respondido : 21/09/2019 8:32 am
Topic starter
answered:
RE: Converting Mk42 to magnetic bed .
After putting magnets in the bed.
Attachment removed
Respondido : 21/09/2019 5:10 pm
Topic starter
answered:
RE: Converting Mk42 to magnetic bed .
Finally converted the firmware for mk42 bed .Now it's doing all the calibrations and working fine .
Thanks alot.
Respondido : 25/10/2019 5:55 am
RE: Converting Mk42 to magnetic bed .
Very creative!
Respondido : 26/11/2019 9:21 pm