XY Skew on new i3 mk3s+ build  

XY Skew on new i3 mk3s+ build

Hi,

I've recently completed a kit build, overall a fun and enjoyable experience. Followed the instructions to a T with no missing or incorrectly placed part. Quality overall is good but I have noticed ~0.3mm skew (severe, according to this) between the left and right side of the bed and the back seems to be lower than the rest. I've compared sides with a ruler on the dashed bed frame, released the M3 screws attaching the rods to the frame and tried to reseat but there's still a bit of a skew. PINDA has no issues, no bumps or knocks or anything.

What else should I be looking at to resolve the skew? Of course, I could fix this via firmware, but I'd prefer to get this as perfectly square as possible first before compensating with software.

Mesh data is

  0.16333  0.20000  0.23000  0.23917  0.24750  0.20333  0.22417
  0.16000  0.24417  0.25333  0.20667  0.26000  0.25917  0.22917
  0.18750  0.27333  0.27167  0.26083  0.26750  0.27083  0.24000
  0.19917  0.26500  0.25250  0.29750  0.28583  0.27583  0.25000
  0.26250  0.30000  0.31000  0.29771  0.30250  0.30333  0.26583
  0.27333  0.31917  0.30583  0.28083  0.29417  0.27833  0.25667
  0.03417  0.06500  0.09583  0.05750  0.09583  0.06000  0.07167